New Arrival RTC DS1302 Real Time Clock Module
The DS1302 is a trickle charge clock chip from DALLAS that contains a real-time clock / calendar and 31 bytes of static RAM to communicate with the microcontroller through a simple serial interface. Real-time clock / calendar circuit provides seconds, minutes, hours, days, weeks, months, years of information, the number of days per month and leap year number of days can be adjusted automatically. The clock operation can be determined by the AM / PM indication in a 24 or 12 hour format. (1) RST reset (2) I / O data lines (3) SCLK serial clock. (1) RST reset (2) I / O data lines (3) SCLK serial clock. Clock / RAM read / write data in a byte or up to 31 bytes of character group communication. DS1302 power consumption is very low to maintain data and clock information when the power is less than 1mW
real-time clock with 2100 can be calculated before the seconds, minutes, hours, days, weeks, months, years of ability, as well as leap year adjustment 31 8-bit temporary data storage RAM Serial I / O port mode makes the pin count the least Wide operating voltage 2.0V working current 2.0V, less than 300nA Read / write clock or RAM data, there are two transfer methods Single byte transfer and multi-byte transmission character group mode 8-pin DIP package or optional 8-pin SOIC package according to surface mount simple 3-wire interface compatible with TTL Vcc = 5V Optional industrial temperature range -40 +85 dual power supply for the main power supply and backup power supply DS1302 real-time clock module parameters are as follows: 1.PCB for the single-panel, size: 44mm * 23mm * 1.6mm 2. With 4 positioning holes, diameter 3.1mm 3. Backup battery for the authentic celestial sphere CR2032, voltage 3V, current 260mAh, non-rechargeable battery. Theoretical data retention time greater than 10 years! 4. Crystal 32.768KHz, Japan imported crystal, matching capacitance of 6pF, size 2 * 6mm 5.DS1302 8-pin plug-in large chip made, the chip below IC Block, easy to replace and plug the chip 6. Module operating voltage is compatible with 3.3V / 5V, and 5V and 3.3V single-chip connection 7. Operating temperature: 0 ° — 70 °
Wiring method (to provide the program as an example, you can access any IO port, modify the port definition in the program can be):
VCC → + 5V / 3.3V GND → GND CLK → P02 DAT → P01 RST → P00 Precautions: 1.VCC and GND do not reverse, so as not to burn the chip 2.51 single-chip P0 port need to connect pull-up resistor, if your microcontroller is not connected to pull-up resistor, you can connect the data line to other ports Payment methods
1. We accept Alipay, West Union, TT. All major credit cards are accepted through secure payment processor ESCROW.
2.Payment must be made within 3 days of order.
3. If you can’t checkout immediately after auction close, please wait for a few minutes and retry Payments must be completed within 3 days.
1.Orders will be shipped within 1-2 business days after the payment verification.
2. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.
3. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
4.Items will be marked as ” Gift ” in low value.
5. Delivery Time:
1. You have 7 days to contact us and 30 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and WE WILL NOT ISSUE YOU A REFUND OR REPLACEMENT. There are NO EXCEPTIONS! Shipping cost is bear by both seller and buyer in half.
2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your po#.
3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from aliexpress. OR, you may choose to have a replacement.
4. We will bear all the shipping cost if the product(s) is (are) not as advertised..
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
If you have any questions, our Customer Service staffs welcome you to email or call us. We strive to answer all questions and resolve any problems as quickly as possible
Your feedback is very important to us . if you have any problem. Pls contact us first. I believe we can solve the problem together. Thanks!!!
0 out of 5 (0 Ratings)
5 Stars (0)
4 Stars (0)
3 Stars (0)
2 Stars (0)
1 Star (0)
|Shipping Company||Shipping Cost||Estimated Delivery Time|
|3 - 7 days|
|3 - 7 days|
|5 - 14 days|
|Post Air Mail||Free Shipping||15 - 45 days|
|Return Policy||If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.
N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
|Seller Service||On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).|
Most Popular from Category
DFRoBot uHex Low Power Controller, Atmega328P 2.7~5V with 14 GPIO 7 power ports 2 sleep-wake interfaces Compatible with Arduino
US $9.89 / piece
Best Promotion 3D Printer Control Controller Board f. RAMPS 1.4 for Reprap Mendel For Prusa For Arduino New Printing Accessory
US $8.90 / piece
10PCS/LOT L298N 100% New Dual H Bridge DC Stepper Motor Drive Controller Board Module for Arduino
US $14.60 / lot
Free shipping !!! MEGA 2560 R3 !!! ATmega2560 R3 AVR USB board + Free USB Cable for Arduino 2560 MEGA2560 R3
US $8.75 / piece
Free Shipping ! new version! 20pcs/lot ATMEGA328P Pro Mini 328 Mini ATMEGA328 5V/16MHz for Arduino
DC Jack Power 7~12V to DC 5V / 3.3V Step-down Converter Voltage Regulator Power Supply Module for breadboad and Arduino
online shopping, buying directly from manufacturers?
- Go to Alibaba.com and enter the wanted item into search field.
- Having made your choice, click "Contact supplier" button on the right
- On the next page enter your request and click "Send" button.
- Upon clicking you will be asked to get registered. Do it and wait for the reply.