MQ 4 MQ4 gas methane sensor Detector Module For font b Arduino b font
Click to see details
MQ 4 MQ4 gas methane sensor Detector Module For Arduino

MQ-4 MQ4 gas methane sensor Detector Module For Arduino

100 % of buyers enjoyed this product!
Availability: in stock
Price:  US $1.08 / piece
from AliExpress
45 days Money back 45 days Money back Returns accepted if product not as described, buyer pays return shipping; or keep the product & agree refund with seller.
On-time Delivery On-time Delivery
Guarantees: On-time Delivery 60 days

Share:

MQ-4 MQ4 gas methane sensor Detector Module For Arduino

USD 1.38/pieceUSD 1.18/pieceUSD 1.20/pieceUSD 1.08/pieceUSD 1.38/pieceUSD 1.20/pieceUSD 1.20/pieceUSD 1.38/piece

You can purchase packages(Click on the picture)facilitate your learning and research:

Product Overview:

Sensitive material MQ- 4 gas sensors used in clean air, low conductivity tin oxide (SnO2). When there is an environment in which the combustible gas sensor, conductivity sensor with increasing concentration of combustible gases in air increases. Use simple circuit can convert the change in conductivity of the gas concentration corresponding to the output signal. MQ-4 Methane gas sensor of high sensitivity, propane, butane and has a good sensitivity. The sensor can detect a variety of combustible gases, especially natural gas, it is a low-cost sensor suitable for a variety of applications. Application: Gas can be used in homes and factories leakage monitoring device, suitable for the detection of liquefied petroleum gas, butane, propane, methane, smoke and the like

Features:

  • Using high-quality dual-panel design,with power indicator and TTL signal output instructions.
  • The switching signal having a DO (TTL) output and analog output AO.
  • TTL output valid signal is low. ( Low-level signal when the output light can be directly connected to the microcontroller or relay module )
  • Analog output voltage with the higher concentration of higher voltage
  • There are four screw holes for easy positioning.
  • Has a long life and reliable stability
  • Rapid response and recovery characteristic

Input voltage : DC5V Power consumption ( current ): 150mA
DO output : TTL digital 0 and 1 ( 0.1 and 5V)
AO output :0.1-0 .3 V ( relative to pollution ) , the maximum concentration of a voltage of about 4V
Special note: After the sensor is powered,needs to warm up around 20S,measured data was stable,heat sensor is a normal phenomenon,because the internal heating wire,if hot is not normal .

Wiring:

  • VCC: positive power supply (5V)
  • GND: power supply is negative
  • DO: TTL switching signal output
  • AO: analog signal output

    NOTE:

    After the sensor is powered, need to warm about 20S, measured data becomes stable, heat sensor is normal

    Size:

    Test program: Function: This version of the test program supporting Use chip: AT89S52 Crystal: 11.0592MHZ Baud rate: 9600 Compiler Environment: Keil [Statement] This procedure is used only for study and reference, please indicate the copyright and author information! ************************************************** ******************* / / ************************************************* ******************* Note: 1, when the measured concentration is greater than the set density, single-chip IO port output low ************************************************** ******************* / # Include // library files #define uchar unsigned char // macro definition unsigned char #define uint unsigned int // macro definition unsigned int / ************************************************* ******************* I / O definitions ************************************************** ******************* / sbit LED = P1 ^ 0; // define microcontroller P1 port of the first one (ie P1.0) to indicate the end sbit DOUT = P2 ^ 0; // define the microcontroller P2 port first one (ie P2.0) as an input sensor / ************************************************* ******************* Delay function ************************************************** ******************* / void delay () // delay procedure { uchar m, n, s; for (m = 20; m> 0; m–) for (n = 20; n> 0; n–) for (s = 248; s> 0; s–); } / ************************************************* ******************* The main function ************************************************** ******************* / void main () { while (1) // infinite loop { LED = 1; // off P1.0 port lights if (DOUT == 0) // When the concentration is higher than the set value, the implementation of the Con { delay (); // delay interference When if (DOUT == 0) // determine the concentration higher than the set value, the implementation of the Con { LED = 0; // P1.0 port lights lit } } } } / ************************************************* ******************* End ************************************************** ****************** / Payment methods
    1. We accept Alipay, West Union, TT. All major credit cards are accepted through secure payment processor ESCROW.
    2.Payment must be made within 3 days of order.
    3. If you can’t checkout immediately after auction close, please wait for a few minutes and retry Payments must be completed within 3 days.
    Shipment
    1.Orders will be shipped within 1-2 business days after the payment verification.
    2. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.
    3. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
    4.Items will be marked as ” Gift ” in low value.
    5. Delivery Time:

    Return/Refund

    1. You have 7 days to contact us and 30 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and WE WILL NOT ISSUE YOU A REFUND OR REPLACEMENT. There are NO EXCEPTIONS! Shipping cost is bear by both seller and buyer in half.
    2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your po#.
    3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from aliexpress. OR, you may choose to have a replacement.
    4. We will bear all the shipping cost if the product(s) is (are) not as advertised..

    Feedback

    We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    If you have any questions, our Customer Service staffs welcome you to email or call us. We strive to answer all questions and resolve any problems as quickly as possible

    Your feedback is very important to us . if you have any problem. Pls contact us first. I believe we can solve the problem together. Thanks!!!

Average Star Rating:
0 out of 5 (0 Ratings)
Name Rating Feedback
Shipping Company Shipping Cost Estimated Delivery Time
DHL 3 - 7 days
UPS Expedited 3 - 7 days
EMS 5 - 14 days
Post Air Mail Free Shipping 15 - 45 days
Return Policy If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.

N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
Seller Service On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).

Most Popular from Category


Price:  US $1.08 / piece
from AliExpress